At the Christmas meeting at Klipstine park, last night the board worked out amongst themselves who-is-who for 2012.
President: Kevin, KB9SNE
Vice-president: Dave, N8KQS
Treasurer: John, W0LFE
Secretary: Nick, KB9UAE
At Large: Matt, KB9QAK
Pat, KA9VRK
Scott, KB9AMM
Providing amateur radio service to the Northeastern Wisconsin community since 1939.
Friday, December 16, 2011
Wednesday, November 16, 2011
A Look At Green Bay Repeaters Over The Years
Here are a few random shapshots of Green Bay repeaters 1976 to 2005:
And if you like nostalgia be sure to check out the old list of hams from 1980:
http://www.k9eam.org/1980/03/amateur-radio-opperators-of-brown.html
And if you like nostalgia be sure to check out the old list of hams from 1980:
http://www.k9eam.org/1980/03/amateur-radio-opperators-of-brown.html
Sunday, July 10, 2011
444.20625 MHz D-Star
Like it or not, the future of two way radio is digital, and we must also advance in this direction.
TV broadcasters were required to be full digital and shut down their analog transmitters in Feb. 2009. This freed up spectrum for the new "700 MHZ public safety band" that is currently being implemented in Brown County.
There is also an FCC mandate for all non-public safety stations to operate on channels with a bandwidth of 12.5 kHz or less beginning January 13, 2013.
The digital premise is that it generally allows more use in a more efficient/ flexible use of band space.
The Mike and Club took advantage of a recent D-Star promotion to enable area amateurs to get their feet wet with digital two-way radio.
D-STAR offers digital voice, short data message, GPS tracking and much more!
Further details can be found on the D-Star page.
Tuesday, June 14, 2011
Innovating Makerspaces
Ham radio operators have long been some of the original open source , Do-It-Yourself (DIY) proponents.
Going back in time, radio stuff was expensive and out of the reach of a lot of hams. So they invented newer and mostly cheaper ways of doing things. They also came up with better ways of doing things because somebody else would see that idea in print and improve upon it. Of course the technology was rather rudimentary, and there was little way to go but up at that point in radio technology calendar.
What most people tend not to think about is the open-source nature of Amateur Radio. While operators most often are seen working in emergency situations, many of the modern conveniences we have today—cell phones, satellites, wireless devices— were developed and tested by radio amateurs.
Decades ago, amateur radio operators were on the forefront of scores of technological innovations, including television, digital communications, solid-state design and cellular networks. The hobby's roots trace back to radio pioneers such as Guglielmo Marconi and FM-inventor Edwin Armstrong.
Well a lot has changed over the years in society and ham radio. Many amateurs have gotten away from these "do-it-yourself" roots. But those types are still out there!
When the economic crisis first started to unfold in 2009, the Wall Street Journal just had an article on how Tinkering is making a comeback amid the economic crisis.
In 2005 just shortly before the economic mess stated to unfold, Make Magazine was introduced by O'Reilly Media. It focuses on do it yourself (DIY) and/or DIWO (Do It With Others) projects involving computers, electronics, robotics, metalworking, woodworking and other disciplines.
The magazine was well accepted by engineering and electronics students. And led to the first Maker Faire. An event filled with DIY projects, science, demos.
These "fests" are now in their 6th year, and being held in California, Detroit and New York and many other places.
As mentioned in the Wall Street Journal article, regional groups are popping up all over the place to help support this innovation. These are referred to as Makerspaces/ Hackerspaces. They are places where people with common interests, usually in science, technology, or arts can meet, socialize and collaborate. A Makerspace can be viewed as a community lab, machine shop, or workshop where people of diverse backgrounds can come together to share resources and knowledge to build/make things.
There are two that I know of in our area:
http://milwaukeemakerspace.org/
And closer to home, http://www.dhmn.net/ an Appleton: a group of hacker/maker/software/hardware technology-enamored people.
And right here in Green Bay: http://www.protogb.org/
If you still have a bit of "amateur" in you, I encourage you to branch-out and check these innovative groups out. I think there can be / should be a lot of crossing over and sharing of talents between some ham radio folks and these groups. These are the types of people that need to welcomed with open arms into the hobby.
Going back in time, radio stuff was expensive and out of the reach of a lot of hams. So they invented newer and mostly cheaper ways of doing things. They also came up with better ways of doing things because somebody else would see that idea in print and improve upon it. Of course the technology was rather rudimentary, and there was little way to go but up at that point in radio technology calendar.
What most people tend not to think about is the open-source nature of Amateur Radio. While operators most often are seen working in emergency situations, many of the modern conveniences we have today—cell phones, satellites, wireless devices— were developed and tested by radio amateurs.
Decades ago, amateur radio operators were on the forefront of scores of technological innovations, including television, digital communications, solid-state design and cellular networks. The hobby's roots trace back to radio pioneers such as Guglielmo Marconi and FM-inventor Edwin Armstrong.
Well a lot has changed over the years in society and ham radio. Many amateurs have gotten away from these "do-it-yourself" roots. But those types are still out there!
When the economic crisis first started to unfold in 2009, the Wall Street Journal just had an article on how Tinkering is making a comeback amid the economic crisis.
"The American tradition of tinkering -- the spark for inventions from the telephone to the Apple computer -- is making a comeback, boosted by renewed interest in hands-on work amid the economic crisis and falling prices of high-tech tools and materials.
Engineering schools across the country report students are showing an enthusiasm for hands-on work that hasn't been seen in years. Workshops for people to share tools and ideas -- called "hackerspaces" -- are popping up all over the country; there are 124 hackerspaces in the U.S."
In 2005 just shortly before the economic mess stated to unfold, Make Magazine was introduced by O'Reilly Media. It focuses on do it yourself (DIY) and/or DIWO (Do It With Others) projects involving computers, electronics, robotics, metalworking, woodworking and other disciplines.
The magazine was well accepted by engineering and electronics students. And led to the first Maker Faire. An event filled with DIY projects, science, demos.
These "fests" are now in their 6th year, and being held in California, Detroit and New York and many other places.
As mentioned in the Wall Street Journal article, regional groups are popping up all over the place to help support this innovation. These are referred to as Makerspaces/ Hackerspaces. They are places where people with common interests, usually in science, technology, or arts can meet, socialize and collaborate. A Makerspace can be viewed as a community lab, machine shop, or workshop where people of diverse backgrounds can come together to share resources and knowledge to build/make things.
There are two that I know of in our area:
http://milwaukeemakerspace.org/
And closer to home, http://www.dhmn.net/ an Appleton: a group of hacker/maker/software/hardware technology-enamored people.
And right here in Green Bay: http://www.protogb.org/
If you still have a bit of "amateur" in you, I encourage you to branch-out and check these innovative groups out. I think there can be / should be a lot of crossing over and sharing of talents between some ham radio folks and these groups. These are the types of people that need to welcomed with open arms into the hobby.
Subscribe to:
Posts (Atom)